Araldite 5 Minutes Rapid High Performance Epoxy Adhesive
Araldite Rapid 5min High Performance Epoxy Adhesive.
The super strong, gap-filling epoxy can be used for:
Waterproof, chemical & heat resistant
Bonds most of materials to themselves or to one another especially :
- Rigid plastic
Cures fast at room temperature (18 - 24 °C). Enable rapid but durable assembly and repair work. Cure slowly at temperature dawn 5 °C
How to use:
- Make sure surfaces to be joined are clean and free from dust, corrosion, dirt and grease.
- For optimum bonding, roughen smooth , glossy surfaces.
- Squeeze out equal amounts of Resin and Hardener
- Mix thoroughly and use within 5 minutes (if at 18-24 °C room temperature).
- Apply mix in both surfaces
- Assemble parts and hold together with clamps, tape, string or weight, etc. for at least 10-15 minutes.
- The newly bonded joint can be handled after 3 hours and attains its full strength after 8 hours.
- To avoid contamination always replace same color cap on same colors tube.
- Avoid skin and eye contacts. Wash hands with warm water and soap.
Packaging: (2 x 17ml)