Category

LIQUI-MOLY EPOXY Adhesive 25ml(Made in Germany)

LIQUI-MOLY-EPOXY-Adhesive -25ml.pdf
product category: 
Content Size: 
25 
Milli Liter (ml)
Stock: 
20.00
No votes yet
-+

Epoxy-Adhesive

At room temperature, Epoxy Adhesive is a fast curing two-component all-purpose adhesive which can be painted over and which creates a hard, rigid adhesive bond or seal within just a few minutes. Epoxy Adhesive is ideal for bonding metals (with the exception of aluminum), fabrics, ceramic parts, wood, glass and concrete to themselves and to each other. The Epoxy Adhesive is equally suited for sealing electronic parts and components.

 

Intended use

Epoxy Adhesive is ideal for repairs or for bonding and insulation in car and vehicle manufacture, as well as for hobbies and in the household and garden. Replacement mixer (mixer tip with thread, part no. 6029 )

 

  Description

Epoxy adhesive is a high-strength, dual-component universal adhesive which dries quickly at room temperature and can be used at temperature ranges up to 120 °C. It is ideally suited for bonding and repairing metal, wood, concrete, glass, ceramics, plastic and rubber – both with themselves and each other. Epoxy adhesive is also suitable for sealing electronic parts and components.

 

 

     Properties

  • Rapid curing
  • Outstanding electric strength
  • High strength
  • High chemical resistance
  • Hardly any loss of material
  • Easy to use

 

 

  Areas of application

Epoxy Adhesive is ideal for repairs or for bonding and insulation in car and vehicle manufacture, as well as for hobbies and in the household and garden. With Epoxy Adhesive, various material such as metals, wood, concrete, glass, ceramics, plastic and rubber can be bonded to themselves and to each other. The Epoxy Adhesive is equally suited for sealing electronic parts and components. Replacement mixer (mixer tip with thread, part no. 6029)

 

 

      Application

Clean and degrease the surfaces to be bonded using Liqui Moly cleaner and thinner (item no. 6130). Immediately before use, remove the cap or previously used, dried-out mixer and attach a new mixer onto the cartridge. Apply the adhesive directly to the surface to be bonded. Join the parts together and leave them to dry. The handling time is 5 minutes and the drying time between 2 and 3 hours at room temperature. After use, leave the mixer on the cartridge. Store in a cool, dry place.

 

   Note:  On smooth surfaces, the adhesive qualities are improved by roughening the bonding surface.

 

Products Information