Category

WEICON Speed-Flex MS-Polymer White, 310ml

WEICON Speed-Flex MS-Polymer White, 310ml.jpg
product category: 
Content Size: 
310 
Milli Liter (ml)
Stock: 
6.00
No votes yet
-+

Replaces traditional fixings 
WEICON Speed-Flex is very strong, pasty, stable, overpaintable (wet in wet), resistant to ageing, weathering, and UV rays and is free of silicone, isocyanate and halogen. WEICON Speed-Flex has an ISEGA certifi cate and can be used as an adhesive in foodstuff technology. 
WEICON Speed-Flex is an adhesive on an MS polymer basis with extremely strong initial strength and is suitable for the bonding of metals, many plastics, ceramics, wood, glass and stone. 
Speed-Flex replaces traditional fixings such as screws, pegs, rivets, etc. The very high initial strength makes bonding possible even on vertical surfaces in indoor and outdoor areas. WEICON Speed-Flex can be used for drywall and interior work, metal construction, tank and apparatus engineering, in ventilation and air conditioning systems, in exhibition stand construction and shopfi tting and in all applications where silicones or products containing silicones are not suitable.

Surface pre-treatment: 
The surfaces must be clean and grease-free. Many surface contaminants, e.g. oil, dust and dirt, can be removed with WEICON Surface Cleaner. For heavily soiled metal surfaces, we recommend WEICON Cleaner Spray S; WEICON Sealant and Adhesive Remover is suitable for removing old paint or adhesive residues. Most materials can be bonded well to themselves and among each other. For certain materials or extreme requirements, we recommend the use of an adhesion agent (primer). Detailed information on this subject is contained in the Primer selection table. A mechanical surface pretreatment, e.g. sanding or sandblasting, can considerably improve the adhesion.

Processing Application methods: 
Professional cartridge gun for 310 ml cartridges (WEICON Cartridge Gun “special”), compressed air gun we recommend a variation with piston rod (WEICON Cartidge Gun) , automatic dosing systems. Joining the parts to be bonded: To ensure optimal wetting, the parts must be joined before the first skin has been formed on the adhesive (skin-overtime).
 

Products Information