Category

WEICON Electro Contact Cleaner - 400 ml

WEICON Electro Contact Cleaner - 400 ml
product category: 
Content Size: 
400 
Milli Liter (ml)
Stock: 
60.00
No votes yet
-+

For cleaning and degreasing electro-technical equipment

Electro Contact Cleaner is used for fast and efficient cleaning and degreasing of soiled or corroded contacts of all kinds. This special formulation with high-purity solvents removes oxide or sulphide layers, combustion residues as well as resinous or sooty soiling from electro-technical or mechanical parts like measuring instruments, tools, balances, switches, sensors, etc. Electro Contact Cleaner reduces voltage losses and increases the electric conductivity. Contamination that can cause tracking current is removed.

 

Due to its low surface tension and viscosity, Electro Contact Cleaner penetrates deeply into the finest channels and fissures, thus developing its efficiency exactly at the point of soiling. Electro Contact Cleaner is neutral against metals, plastics, elastomers, lacquers and coatings. The compatibility with sensitive surfaces or materials should be tested prior to use.

 

Applications:

  • Cleaning and degreasing of electro technical or mechanical parts, like e. g. electric machines, measuring instruments, balances, switches or sensors.
  • Also ideal for all electric connections, contacts, relays and switchboard plants.

 

Directions:
Before applying Electro Contact Cleaner, disconnect electric devices from the power line and wait for some minutes until there is no more electric tension inside the machine. Spray a sufficient quantity onto the parts to be cleaned from a distance of 25-30 cm. Electro Contact Cleaner evaporates very quickly and does not leave any residues. Wiping or brushing supports the cleaning effect. Devices should be switched on only when both propellant and active substance have evaporated completely.

 

Packaging:
400 ml Spray can, Art.No.: 11210400

 

Processing

Before applying Electro Contact Cleaner, disconnect electric devices from the power line and wait for some minutes until there is no more electric tension inside the machine. Spray a sufficient quantity onto the parts to be cleaned from a distance of 25-30 cm. Electro Contact Cleaner evaporates very quickly and does not leave any residues. Wiping or brushing supports the cleaning effect. Devices should be switched on only when both propellant and active substance have evaporated completely.

 

Storage

Pressurized container: protect from sunlight and do not expose to temperatures exceeding +50°C.

Products Information