Category

AMBERSIL SILICONE FG (NSF silicone lubricant ) - 400 ml (MADE IN UK)

AMBERSIL-SILICONE-FG (NSF silicone lubricant ) - 400 ml
Content Size: 
400 
Milli Liter (ml)
Stock: 
36.00
No votes yet
-+

SILICONE FG

FOOD PROCESSING SAFE®SILICONELUBRICANT

 

NSF H1 Registered Silicone Lubricant

Use where reduced friction is required, particularly on plastic-to-plastic components. Use on guide rails in  finished product lines or as a guide rail and labelling equipment anti-stick treatment to dramatically reduce label and adhesive build-up.

 

SILICONE FG

lubricates, protects, waterproofs and restores. A

blend of high quality stable silicone oils. The highly versatile, non-corrosive formula lubricates, protects, waterproofs and restores a wide range of parts and equipment. Ensures superior lubrication of plastics and provides excellent separation and release properties.

 

 

FEATURES

•NSF H1 registered (N°138000) meets USDA 1998 H1, to be used as a lubricant with Incidental food contact

•Formsa colourless, non-staining film

•Highly water-resistant; repels water from glass, ceramics, fabrics and leather

•Eliminates squeaking, binding and sticking

•Protects metals, plastics, rubbers and other surfaces

•Low surface tension gives better coverage and deeper penetration

•Effective over a wide temperature range (-40°C to +200°C)

•Excellent release properties

•Fitted with a 360OSpray System for all angle use, even upside down

•Does not contain nut oils or nut oil derivatives

 

 

APPLICATIONS

•Prevents hardening and freezing of rubber seals

•Prevents plastic assemblies from squeaking and binding

•Renovates plastic, rubber and wooden surfaces

•Provides excellent lubrication especially between parts made of dissimilar

materials: e.g. metal/plastic, plastic/plastic, metal/rubber

•For use on virtually any part and equipment made of metal, plastic, rubber, nylon or wood

•Protects and lubricates tools, hoists, jacks, locks, latches, switches and controls, zippers, springs and pulleys

•As a release agent in the moulding of plastic and rubber

 

 

DIRECTIONS

•Spray light, even film on areas requiring lubrication or protection

•Use extension tube for hard to reach areas

•Repeat application if necessary

•Harmless to most common used rubbers and plastics (test prior to use)

•Removal: by Ambersil Amberklene FG

•Do Not use on energised (live)equipment

 

STORAGE

The product may be stored at normal ambient temperatures and has a shelf life

of not less than 72 months with correct storage. Aerosols should always be stored below 50OC, away from direct heat and naked flame.

 

 

HEALTH AND SAFETY

Health and Safety sheet available separately.

Products Information