LIQUI-MOLY WAX COATING-300ml
A combination of the most up-to-date, highly effective, wax-based agents. The adherent, elastic and transparent protective film offers outstanding, reliable, long-term protection during inside and outside storage. The thin coating does not impair any subsequent welding work. Normal handling is possible soon after the non-oil based film has been applied.
The outstanding protective properties of Wax Coating offer a wide range of applications for inside and outside storage as well as for the transport and dispatch of machines and metal components.
Extremely adherent, wax-based corrosion protection containing state-of-the-art agents. The adherent, permanently elastic and transparent protective film offers outstanding, reliable, long-term protection for inside and outside storage. Resistant to salt water and corrosive influences. The thin coating does not impairany subsequent welding work.
- Outstanding resistance to salt water
- Excellent corrosion protection
- Can be used for inside and outside storage
- Excellent long-term protection
- Transparent, adherent and waterproof protective
Areas of application
For inside and outside storage, transport and dispatch of machines and metal components. The thin coating does not impair any subsequent welding work. Normal handling is possible soon after the nonoil-based film has been applied.
Shake can well before use and apply by spraying. The coating thickness is between 15 m and 50 m depending on environmental conditions. Apply to clean, dry surfaces. Apply several coats to increase protection against corrosion. The contents of the can should be at room temperature during application. When spraying in enclosed spaces, make sure that there is sufficient ventilation. After use, clear spray nozzle by inverting can and spraying until only the propellant emerges.
Note: Engine compartment cleaner, part number 3326, can be used for removal of the wax coating. The application notes can be found in the product information for part no. 3326.