Processing

WEICONLOCK is ready for use and should be applied evenly direct
from the bottle/tube with the dispensing tip (avoid direct contact
of dispensing tip with metal). On press fitted parts and larger
cylindrical assemblies a thin and uniform layer should be applied on
both surfaces. Join parts quickly. For sliding seats, turn the parts
against each other when joining for an optimal distribution of the
adhesive. Joint parts should not be moved until handling strength
is reached. Do not pour back into the bottle any WEICONLOCK
fluid which had contact with metal; even smallest metal particles
will cause the content of the bottle to cure. In series construction,
the use of manual or automatic applicators is recommended.
Storage
WEICONLOCK can be stored in the unopened original container
for at least 24 months at room temperature. Keep away from
heat sources and direct sunlight. The air in the bottle/tube keeps
WEICONLOCK liquid.
Safety and health
When using WEICON products, the physical, safety technical,
toxicological and ecological data and regulations in our EC safety
data sheets (www.weicon.com) must be observed.