WEICONLOCK is ready for use and should be applied evenly direct

from the bottle/tube with the dispensing tip (avoid direct contact

of dispensing tip with metal). On press fitted parts and larger

cylindrical assemblies a thin and uniform layer should be applied on

both surfaces. Join parts quickly. For sliding seats, turn the parts

against each other when joining for an optimal distribution of the

adhesive. Joint parts should not be moved until handling strength

is reached. Do not pour back into the bottle any WEICONLOCK

fluid which had contact with metal; even smallest metal particles

will cause the content of the bottle to cure. In series construction,

the use of manual or automatic applicators is recommended.