SCOPE OF USE:

• Recommended for bonding a wide variety of materials e.g. wood, aluminium, laminates, leather (shoe, bags,etc.) rubber, cork, felt, foams, PVC, etc. to absorbent and non-absorbent substrates.

•  Due to the high temperature resistance, UV-stability and bonding strength it can also be used for the bonding of protection boards and soundproofing panels                                                     (bituminous, rubber, PVC, etc.) to numerous substrates such as PVC, EPDM, HDPE, bituminous membranes, etc.

APPLICATION:
Surface preparation:

Surfaces should be levelled, dry, clean of dust and free of

substances which may impair adhesion.

Application procedure:

Apply a thin layer of CONTACT ADHESIVE (Premium) on both

surfaces by brush or a trowel. Wait 10 to 15 minutes for the

solvent to evaporate from the adhesive. Bring together, and

strongly press the two surfaces for a short period of time. A

successful adhesion depends on the strength and not on the

time span of the applied pressure. Such an executed bond

is long lasting and resistant to water, heat, cold and acids.

Cleaning:

Clean adhesive residue and tools with carbon-solvent only