 Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnaces, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic .molding machines, chemical and steel plant equipment. 

 Heavy duty thread compound for studs, nuts, bolts, valve stems, spindles, exhaust pipes, cylinder and engine head screws, steam lines exposed to high temperatures, water and corrosives to provide complete protection from seizure and corrosion and which also need to be reopened or retightened after assembly and initial operational period.  

Benefits

 Extremely wide service temperature range of -30°C to +1100°C

 Makes disassembly easy and non-destructive even after long operational periods at high temperatures and adverse working environments

 High load withstanding capacity

 Creates an effective matrix between mating surfaces to prevent metal-to-metal contact  Protects surface from wear and friction

 Good corrosion protection

 Water resistant

 Ensures consistent tightening of threaded connections and provides an optimum balance between torque required to tighten and pretension

 Prevents bolt breaking, sintering, fusion, seizure, thread striping and distortion of threads  Meets requirements of MIL-PRF-907G 

Clean and degrease the surface with a wire brush to remove all previous residues or any micro rust prior to application. Apply this paste with a wire brush in adequate quantity on the surface and right down to the base stem of the thread. The excess paste need not be removed as it provides a good sealing effect. Do not mix with other oils or greases.