Extremely pure, solid lubricant paste for bolted joints; contains no lead, nickel, sulfur, chlorine or fluorine  

Features & benefits • Compatible with high temperatures (1,400°C)

• Excellent load-carrying capacity and seize protection

• Sulfur content of less than 250 ppm, with a total halogen content (including chlorine) of less than 200 ppm

• Low seepage, so it can be used in places wherein cleanliness is required

• Allows screws to be removed easily, even after extended periods of use at high temperatures

• Does not include components that become brittle at high temperatures. 

Specifications

• Fulfills technical requirements of Siemens TLV 9600 02/01

• Fulfills technical requirements of General Electric TIL 1117-3RI

• Fulfills technical requirements of EDF-PMUC

• Fulfills technical requirements of Pratt & Whitney PWA-36246 

Composition

• Mineral oil

• Special solid lubricants 

Applications

Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and are made of heat-resistant or extremely heat-resistant steels (e.g., those made from nickel-based alloys). Used successfully for the bolted joints of gas and steam turbines in power stations. 

How to use

Clean and degrease the location of use before applying this product. Use a wire brush to remove any sludge or rust on the screws. Carefully apply the paste to fully coat the screws. Do not mix with other lubricants. 

Handling precautions

PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. 

Usable life and storage

When stored between 0°C and 35°C in the original unopened containers, this product has a usable life of 60 months from the date of production. 

Packaging

This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest MOLYKOTE®