Silver grade anti seize paste for high temperature anti seize applications

 Applications

Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnaces, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic molding machines, chemical and steel plant equipment

 Benefits

– Extremely wide service temperature range of -50°C to +900°C

– Makes disassembly easy and non-destructive even after long operational periods at high temperatures and adverse working environments

– High load withstanding capacity

– Creates ah effective matrix between mating surfaces to prevent metal-to-metal contact

– Protects surface from wear and friction

– Good corrosion protection

– Water resistant

– Ensures consistent tightening of threaded connections and provides an optimum balance between torque required to tighten and pretension

– Prevents bolt breaking, sintering, fusion, seizure, thread striping and distortion of threads

Directions for Use

Clean and degrease the surface with a wire brush to remove all previous residues or any micro rust prior to application Apply this paste with a wire brush in adequate quantity on the surface and right down to the base stem of the thread The excess paste need not be removed as it provides a good sealing effect. Do not mix with other oils or greases.