Heavy duty, multipurpose extreme pressure grease containing MoS2 solid lubricant.

Applications

Use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.

- For heavy duty and long-term lubrication to bearings and equipment of heavy engineering machinery, textile processing machines, compressors, exhaust fans, overhead cranes, mining and construction equipment, chassis of automotive and transportation fleet, sugar, and cement plant machinery, rolling mills.

- For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

Benefits

 Extremely wide service temperature range of -30°C to +130°C (up to +150°C for short intervals)

 Forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces

 Prevents metal-to-metal contact, reduces friction and wear & protects against fretting corrosion

 Highly resistant to hot or cold water and water washout

 Extends re-lubrication intervals and cuts down lubricant consumption

 Combination of EP additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication

 Offers good surface protection and corrosion inhibiting properties

 Very good performance under moderate to high loads and medium speeds under reciprocating motions

 Makes sliding smoother and reduces operational noise

 Increases wear life of the equipment & out performs conventional lubricants

 Good resistance to oxidation 

Directions for Use

Use as supplied. Never dilute or mix with other oil or grease. Apply on all clean sliding surfaces by normal greasing methods i.e., by brush, grease gun or dispense via centralized lubrication systems.