Grease for Food Processing Machinery 

Product Description

FMG 500 is a NLGI Class 2 food grade grease based on premium quality NSF H1 registered base oils and an aluminum complex thickener. It inherently possesses excellent lubricating qualities along with a high degree of water resistance and is ideal for lubrication of almost any type of application requiring a food grade lubricant.

FMG 500 exhibits exceptional thermal and mechanical stability, high drop point and high load carrying capacity and provides high performance lubrication when subjected to high temperatures.

FMG 500 is ideally suited for lubrication of bearings operating under low to medium speeds under low to medium loads and exposed to extreme temperatures.

FMG 500 food grade grease is designed for use in a variety of industrial applications where regulations specify H1 grease for incidental food contact.

FMG 500 food grade grease is formulated using nontoxic ingredients and food grade additives and meets FDA and NSF H1 requirements.

Also available as FMG 500/00 semi fluid food grade grease for centralized lubrication or gear box applications.  

Uses / Application

Food processing machinery

Breweries

Pharmaceutical manufacturing machinery

Cold Storage Units

Bearings

Chains

Slideways

Taps

Gearboxes

Joints

Springs

Cams

Rollers

Conveyors

Centralized lubrication systems 

Benefits

 NSF H-1 Registration Certificate # 162676

 Extremely wide service temperature range of -20°C to +150°C

 Excellent resistance to water and water washout

 Extends re-lubrication intervals and cuts down lubricant consumption

 Combination of EP additives increase the load bearing capacity

 Offers good surface protection and corrosion inhibiting properties

 Very good performance under moderate to high loads and medium speeds under reciprocating motions

 Makes sliding smoother and reduces operational noise

 Increases wear life of the equipment & out performs conventional lubricants

 Good resistance to oxidation and corrosion  

Directions for Use

Use as supplied. Never dilute or mix with oil or grease. Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralized lubrication systems. Replace cover after use.