Product Description
® WLG 2 is a heavy-duty high performance extreme pressure grease containing white solid lubricants for providing non-staining clean lubrication for applications where dark grease contamination cannot be tolerated.
It protects against heavy loads, galling, seizure and contains solid lubricants and EP additives that enable it to withstand higher loads and reduce wear and friction.

ASV ® WLG 2 resists vibratory shocks and does not break down under
prolonged use. Suitable for operating temperature ranges from -25°C to
+130°C and does not contain any CFCs or ozone depleting
chemicals.
Applications:

For all gears, chains, bushes, joints, pins, bearings, mechanical & precision instruments, domestic appliances, sliding surfaces and similar components where a dark lubricant cannot be used for reasons of contamination and
transfer of lubricant on to processed component.

Benefits:

 Non staining and provides clean lubrication
 High load carrying ability
 Reduces wear and friction and prevents fretting corrosion
 Increases service life of equipment
 Very good adhesion to metal surfaces
 Completely water proof
 Protects surfaces from corrosion

Directions for Use:

Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface in thin light coats. Allow the solvents to evaporate. Spray from a distance of 20-30 cms.
For cleaning the valve dip-tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.

Caution:

Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. 
Use with adequate ventilation.