Duster 45 is a high pressure composition for removing microscopic dust from assemblies. its high purity formulation and high pressure, moisture tree cleaning agent does not scratch plastics, glass, optics, rubber or hardware. lt is non- staining, non-conductive, non-corrosive and does not contain any CFCs, chlorinated solvents or ozone depleting chemicals.

Applications

Use on all equipment to remove dust in any industrial, marine, aviation electrical/electronic equipment.

– Photographic equipment

– Watch mechanisms

– Film negatives

– Computers

– Data processing equipment

– Electromechanical instruments

– Printed circuit boards

– Fiber glass connectors

– Communication equipment

– Precision equipment

Benefits

– Delivers pure 100% dry, moisture free cleaning agent

– ideal cleaning agent where solvents cannot be tolerated or are inappropriate cleaning agents

– Non-conductive and safe to use on all metals, plastics. rubbers. optics. glass and delicate components

– Non staining & non-corrosive

– Leaves no residue and blows away microscopic dust, lint, sand, metallic oxides and other soils

– Non abrasive

Directions for Use

Do not shake can before or during use and hold can upright while spraying. Clear any liquid residue that may have formed in the dip tube of the valve stem by pressing the actuator. Use short blast spray method. Use extension tube for tight areas. Spray on film negatives only after clearing the valve first.

Caution

Extremely flammable contents. Do not spray near naked flame hot surfaces or energized equipment. Use with adequate ventilation.