* As a low friction running-in, metal priming paste for all new or rebuilt mechanical equipment such as gears, sliding bearings, slide ways, joints, sleeves, splines, cams, journal bearings.

*As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.  For lubrication of all sliding metal surfaces to reduce wear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splined shafts, pumps, valves, threaded spindles, moving screws, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings, ball and roller bearings, shafts, bolts and pulleys.

*As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.  As a antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.

*As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling. 

Benefits 

* Extremely wide service temperature range of -35°C to  +450°C  Low coefficient of friction

* High pressure withstanding capacity

* Load bearing capacity exceeds the yield point of most metals  Prevents metal-to-metal contact and offers protection from wear and friction.

* Prevents seizure, scoring, galling, fretting corrosion and stick slip  *Reduces press fitting force required and prevents distortion or misalignment.

* Makes assembly easier and disassembly rapid and nondestructive      * irrespective of operational period or conditions.

*Economical to use owing to its high surface coverage capacity

* Aids running in and provides emergency lubrication during start ups. 

*Clean the sliding surfaces and friction points.

*Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film.

*Do not use in excess as is customary with greases. Do not mix with other oils or grease.