ASV RNC 10 Clear Wax Based Corrosion Inhibitor

(0 reviews)

Price
SAR45.00 /PCS
Shape
Quantity
(153 available)
Total Price (Price does not include VAT.)
Share

Reviews & Ratings

0 out of 5.0
(0 reviews)
There have been no reviews for this product yet.

Corrosion Inhibiting Wax Coating

Product Description
ASV® RNC 10 is a thin dry waxy film type corrosion inhibitor for providing short-term protection from rust and corrosion for up to 9 months indoors under normal storage conditions. It forms a light protective film over the surface and seals out entry of moisture & corrosion. Its dry nonstaining formulation resists dirt & dust build up and is safe for use on all metals.
ASV® RNC 10 does not contain any CFCs or any ozone depleting substances.


Applications
Corrosion Protection for metal parts in storage,
manufacture, shipping or in service as:
 Dies
 Jigs
 Tools
 Molds
 Instruments
 Solenoids
 Welds
 Castings
 Shafts
 Motors
 Spare Parts
 Freshly Machined Surfaces


Benefits
 Thin dry film provides short term corrosion protection for up
to 9 months indoor storage conditions
 Ultrathin film provides mild lubrication
 Stops further rusting
 Penetrates into minutest cracks to stop further moisture
ingress
 Removal of the film is not necessary
 Does not attract dirt & dust


Directions for Use – Bulk
Apply onto clean, dry and degreased surfaces by means of brush or by dipping components into the fluid. Ensure removal of rust, loose scales, dirt, dust and trapped moisture from surfaces before application. Mask areas not required to be coated. Apply uniformly a light film for maximum coverage. Two light films are better than a single thick film.
For thicker films, recoat only after previous coat dries. Reuse
as required.


Directions for Use – Aerosol 
Shake can till bearing noise from inside is audible. Spray liberally, a light and even film onto the surface. Spray on to clean and degreased surface and remove dirt, rust, scales, dust and entrapped moisture prior to application of this product. Allow solvents to evaporate and film to dry before recoating. Reuse as required.


Caution
Contains flammable propellant and solvents. Do not spray near naked flame, hot surfaces or energized equipment.
Use with adequate ventilation. and using for industrial materials and like

Frequently Bought Products

All categories
Flash Sale
Today Deals