Oily Film Type Medium Term Corrosion Inhibitor  

Product Description ASV® RNC 20 forms a clear thin non-drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion.

It is non-conductive, non-staining and offers complete protection to metal surfaces indoors as a medium term rust inhibitor for protection against corrosion and moisture penetration for up to12 months.

ASV® RNC 20 does not contain any silicones, ozone depleting chemicals, CFCs or harmful chlorinated solvents and is safe for use on around all metals, plastics, rubbers and other industrial finishes.  

Applications

For effective long term lubrication and protection of all mechanical and electrical applications as: 

 Bearings

 Tools

 Instruments

 Shafts

 Chains

 Keyways

 Locks

 Hinges

 Nuts  Springs

 Valves

 Cables

 Linkages

 Pulleys

 Wire Ropes 

Benefits

 Provides long term indoor protection to surfaces for up to 12 months

 Very effective corrosion inhibitor and assures complete surface protection from water, oxygen and rust

Nonconductive, non-staining and compatible with most plastics, metals, rubbers and coatings  Does not leave any sticky residues

 Permanently seals out moisture

 Can be used without removal of the oily protective film  Safe, non-flammable CO2 propellant for aerosol 

Directions for Use - Bulk

For metal protection, apply liberally and do not wipe off protective film from the surface. Allow 4 to 6 hours for the solvents to evaporate before resuming operations. Clean and dry surfaces completely before applying power.

Directions for Use – Aerosol

Spray liberally onto the surface. Allow solvents to penetrate and free rusted parts. For moisture displacement, spray until clear product (amber-pale straw) comes out and emulsified residue is totally clear.

For metal protection, spray liberally and do not wipe off protective film from the surface.

Caution

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation