Product Description
ASV® Aqua Blue 50 is a
multipurpose, non-abrasive, aqueous, biodegradable, cleaner / degreaser which
can be further diluted with water to meet various cleaning applications. It
aggressively attacks and removes grease, oil, dirt, sludge and other light
contaminants and allows to be rinsed off with water. It does not contain any
ozone depleting chemicals or chlorinated solvents and equals performance of
solvent-based cleaners. Applications Suitable for mechanical components washing
and degreasing applications.
Benefits
ü Removes oil,
grease, dirt & sludge deposits
ü Biodegradable & leaves no residue
ü Multipurpose foaming formula
ü Non-flammable
& non-abrasive
ü Equals
performance of solvent based degreasers
Recommended
Dilution Ratios ASV® Aqua Blue 50: Water |
|
Heavy duty cleaning |
1:0 to 1:5 |
Medium duty cleaning |
1:10 to 1:30 |
Light duty / Pressure Cleaning |
1: 30 to
1:100 |
Dilution levels will vary subject to the type
of surface, contaminant and contamination level of the surface being cleaned.
Start at higher concentrations of ASV® Aqua Blue 50 in water and work up to
lower concentrations till satisfactory performance and cleaning is obtained.
Directions for Use:
ü Dilute the
product by adding water to it.
ü Stir
mechanically with a stirrer if required.
ü Apply product by
brush, swab or by dipping components into the cleaner solution.
ü Allow time to
penetrate contaminants and then rinse off with water.
ü For heavily
soiled parts, use a wire brush or an abrasive to remove excesses.
ü Always clean the
surface thoroughly with water to remove any residues left behind and never
allow to dry on any surface.
ü Test for
compatibility on soft metals and plastic surfaces by checking on a small area.